Brushless 17 teaching video
Brushless 17 teaching video
1. Plug in the battery and put it on somewhere flat, and wait for about 3 secs.
2. Turn on the controller, after you hear "bi bi beep", pull the left throttle up and down once to do the pairing.
3. You may either throw it away or press the takeoff button on the controller.
4. If you want to turn on the sensor, you may have to long press the button on the top of left hand side for 3 seconds.
Avoidance16 Teaching video
Tutorial Of Smini13
2. Turn on the drone and the controller.
Now you will see the light on the drone will flashing slowly.
3. Move the left throttle up and down once to do the pairing.
The drone will flash the light for about 5 seconds, then the light will no longer flash again. It means the drone is pair completely.
4. Click the second button from the left bottom, then the drone will fly up.
5. If you wanna use the camera function, please download BJ-UFO in your smartphone/tablet.
6. Connect the Wi-Fi with you phone/tablet, open the app and press "Play", the image will show up on your phone.
Tutorial Of Smini11/12
Second, turn on the drone and the controller.
Now you will see the light on the drone will flashing slowly.
Third, move the left throttle up and down once to do the pairing.
The drone will flash the light for about 5 seconds, then the light will no longer flash again. It means the drone is pair completely.
Forth, click the left throttle once to unlock the drone. Now you will see the propellers will start spin.
Fifth, move the left throttle up, then the drone will fly up.